BFE Placid 2-Axis Stabilizing Arm

Description

With the marvellous success of  BFE series, BFE feels proud to introduce a two axis spring arm – BFE Placid that controls vibrations on the vertical axis or side to side axis which come from walking or running. It attaches at the end of the BFE top arm and allows you to go from high to low mode and to control the vertical and side to side stabilization simultaneously.

The Placid arm can take rigs between 5-20kg / 11-44lb and you can easily fine tune the spring tension. This arm allows you to get the camera rig at the right distance from your body. Furthermore, you can experience the wide range of professional shots with extreme smoothness.

Spring Tensioner

You can change the tension spring according to weight of your camera setup whether it is low, medium or heavy one as mentioned in the picture.

Compatible with our complete range of BFE

BFE 300N, weighing capacity : 5 – 8 kg (11 – 17.6 lb)

BFE 400N, weighing capacity : 8 – 10 kg (17.6 – 22 lb)

BFE 500N, weighing capacity : 10 – 12 kg (22 – 26.4 lb)

BFE 600N, weighing capacity : 12 – 15 kg (26.4 – 33 lb)

BFE 750N, weighing capacity : 15 – 19 kg (33 – 41.9 lb)

BFE Steady Camera (FLCM-FLN), weighing capacity : 7.5 kg(16.53 lb)

Specification

–  Height: 205mm
–  Width: 395 mm
–  Depth: 65mm
–  Material : Aluminum, Carbon Steel, Stainless Steel, EPDM rubber
–  Max Load: 20Kg / 44lb
–  Min Load: 5kg/ 11lb
–  Weight of product: 1.80Kg / 3.96lb
–  Foam Packing Dimension: LxWxH : 42cmx20.5cmx12cm
–  Weight(With packing):2.40kg

In the box

–  BFE Placid Two Axis Spring Arm
–  2x Tension Spring
–  Foam Packing