- You have no items in your shopping cart
- Subtotal: ₹ 0
Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set
₹ 305,000
Product Highlights
- Up to 1000′ Range Line of Sight
- Supports up to 1080p60 Resolution
- Backwards Compatible with Select Systems
- 3G-SDI Inputs/Outputs
1 in stock
CompareTeradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set
Teradek 1000 XT Overview
The Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features 1000′ line-of-sight transmission distance when used together. You can send and receive visually lossless 3G video signals from a Bolt 1000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor.
The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, 480p and 576p are only supported via HDMI. You can transmit up to three other third-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.
- Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter
With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole, two M3 threaded holes, and a built-in 3/8″-16 ARRI accessory mount. The included antennas provide a powerful signal that can travel up to 1000′ line-of-sight.
A shoe mount is included for attaching to cameras without 1/4″-20 threads. For convenience, both a standard BNC cable and HDMI cable are included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers, built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.
Compatible with Bolt 1000 XT and LT, Sidekick II, and 703 Bolt
HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
5 GHz Spectrum Analyzer
Manual channel selection
Supports 11 channels in the 40 MHz band
SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
1/4″-20 and M3 mounting points
Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter
| Transmitter | |
| Construction | Milled aluminum (chassis) and regulation-compliant PCB |
| Video Inputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI type A receptacle |
| Video Outputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
| Latency | <0.001 seconds (Tx to Rx without format conversion) |
| Channels | 40 MHz: 11 (USA) |
| Supported Resolutions | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50 |
| Video Processing | Compression Visually lossless Color Correction |
| Audio Compression | 48 kHz, 24-bit PCM |
| Audio Input | Embedded |
| Interfaces | Switches: On/Off and Reset Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows USB Interface Functionality: Upgrade via mini-USB |
| Wireless | Non-DFS Frequencies
UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz EU & JP: 5.19 to 5.23 GHz US: 5.27 to 5.55 GHz and 5.67 GHz EU & JP: 5.27 to 5.67 GHz |
| RF Power | 17 dBm EIRP |
| Encryption | AES-128 |
| Range | Up to 500′ / 152.4 m line of sight |
| Unicast Multicast | Unicast / Multicast |
| Noise Rejection | Can coexist with WiFi and 5 GHz cordless phones |
| Power Input | 2-pin connector 7 to 17 VDC |
| Power Consumption | Nominal 7.3 W (measured at 1080p60) |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Mountable | 1 x 1/4″-20 threaded mounting hole 2 x M3 threaded mounting holes |
| Dimensions | 0.95 x 2.6 x 4.47″ / 2.41 x 6.6 x 11.35 cm |
| Weight | 8 oz / 226 g |
In the Box
Bundle Items
Transmitter
- D-Tap Power Cable (18″)
- Shoe Mount
- 2 x Antenna
- SDI Cable (10″)
- HDMI Type A to Type A Cable
- Limited 1-Year Warranty
Receiver
- Thumbscrew
- Light Stand Adapter (1/4″-20)
- BNC Cable (10″)
- HDMI Cable Type A to Type A (18″)
- PSU 2-Pin Connector to 18W AC Adapter Cable (6′)
- 5 x Wireless Antennas
- USB 3.0 Cable Type-A to Micro-B (3′)
- Limited 1-Year Warranty
Reviews
There are no reviews yet.